KtLint configuration
Ktlint uses a limited set of .editorconfig properties for additional configuration. A sensible default value is provided for each property when not explicitly defined. Properties can be overridden, provided they are specified under [*.{kt,kts}]. Ktlint uses some properties defined by .editorconfig, IntelliJ IDEA and custom properties.
Danger
Unfortunately IntelliJ IDEA has an autoformat issue regarding .editorconfig. Due to this error an additional space is added between glob statements, resulting in [*{kt, kts}] instead of [*{kt,kts}]. The .editorconfig library used by ktlint ignores sections after encountering a space in the list. As a result, the rule is not applied on all files as documented in the original ktlint issue.
Code style¶
By default, the offical Kotlin code style is applied. Alternatively, the code style can be set to android.
Disabled rules¶
Warning
Properties disabled_rules and ktlint_disabled_rules are deprecated in KtLint 0.48 and are marked for removal in KtLint 0.49.
By default, no rules are disabled. The properties disabled_rules and ktlint_disabled_rules hold a comma separated list (without spaces). Rules which are not defined in the standard ruleset have to be prefixed. Rules defined in the standard ruleset may optionally be prefixed.
Example:
[*.{kt,kts}]
disabled_rules = some-standard-rule,experimental:some-experimental-rule,my-custom-ruleset:my-custom-rule
Starting with KtLint 0.48 entire rule sets and individual rules can be disabled / enabled with a separate property per rule (set).
All rules in a rule set can be enabled or disabled with a rule set property. The name of the rule set property consists of the ktlint_ prefix followed by the rule set id. Examples:
ktlint_standard = disabled # Disable all rules from the `standard` rule set provided by KtLint
ktlint_experimental = enabled # Enable all rules from the `experimental` rule set provided by KtLint
ktlint_your-custom-rule-set_custom-rule = enabled # Enable all rules in the `custom-rule-set` rule set (not provided by KtLint)
Note
All rules from the standard rule set are enabled by default and can optionally be disabled in the .editorconfig. All rules from the experimental and custom rule sets are disabled by default and can optionally be enabled in the .editorconfig.
An individual property can be enabled or disabled with a rule property. The name of the rule property consists of the ktlint_ prefix followed by the rule set id followed by a _ and the rule id. Examples:
ktlint_standard_final-newline = disabled # Disables the `final-newline` rule in the `standard` rule set provided by KtLint
ktlint_experimental_type-argument-list-spacing = enabled # Enables the `type-argument-list-spacing` rule in the `experimental` rule set provided by KtLint
ktlint_custom-rule-set_custom-rule = disabled # Disables the `custom-rule` rule in the `custom-rule-set` rule set (not provided by KtLint)
Note
The rule properties are applied after applying the rule set properties and take precedence. So if a rule set is disabled but a specific rule of that rule set is enabled, then the rule will be executed.
Final newline¶
By default, a final newline is required at the end of the file.
This setting only takes effect when rule final-newline is enabled.
Force multiline function signature based on number of parameters¶
By default, the number of parameters in a function signature is not relevant when rewriting the function signature. Only the maximum line length determines when a function signature should be written on a single line or with multiple lines. Setting ktlint_function_signature_rule_force_multiline_when_parameter_count_greater_or_equal_than can be used, to force a multiline function signature in case the function contain at least a number of parameters even in case the function signature would fit on a single line. Use value -1 (default) to disable this setting.
[*.{kt,kts}]
ktlint_function_signature_rule_force_multiline_when_parameter_count_greater_or_equal_than= -1
This setting only takes effect when rule experimental:function-signature is enabled.
Wrapping the expression body of a function¶
Setting ktlint_function_signature_body_expression_wrapping determines if and when the expression body of a function is wrapped to a new line. This setting can be set to value default, multiline or always.
When set to default, the first line of a body expression is appended to the function signature as long as the max line length is not exceeded.
// Given that the function signature has to be written as a single line function signature
fun someFunction(a: Any, b: Any): String = "some-result"
.uppercase()
// Given that the function signature has to be written as a multiline function signature
fun someFunction(
a: Any,
b: Any
): String = "some-result"
.uppercase()
When set to multiline, the body expression starts on a separate line in case it is a multiline expression. A single line body expression is wrapped only when it does not fit on the same line as the function signature.
// Given a single line body expression and
// a the function signature that has to be written as a single line function signature and
// it does not exceed the max line length
fun someFunction(a: Any, b: Any): String = "some-result".uppercase()
// Given a single line body expression and
// a the function signature that has to be written as a multiline function signature and
// it does not exceed the max line length
fun someFunction(
a: Any,
b: Any
): String = "some-result".uppercase()
// Given a single line body expression then always wrap it to a separate line
fun someFunction(a: Any, b: Any): String =
"some-result"
.uppercase()
fun someFunction(
a: Any,
b: Any
): String =
"some-result"
.uppercase()
When set to always the body expression is always wrapped to a separate line.
fun someFunction(a: Any, b: Any): String =
"some-result".uppercase()
fun functionWithAVeryLongName(
a: Any,
b: Any
): String =
"some-result"
.uppercase()
This setting only takes effect when rule experimental:function-signature is enabled.
Ignore identifiers enclosed in backticks¶
By default, the identifiers enclosed in backticks are not ignored.
According to Kotlin coding conventions it is acceptable to write method names in natural language. When using natural language, the description tends to be longer. This property allows lines containing an identifier between backticks to be longer than the maximum line length. (Since 0.41.0)
This setting only takes effect when rule max-line-length is enabled.
Import layouts¶
By default, the same imports are allowed as in IntelliJ IDEA. The import path can be a full path, e.g. "java.util.List." as well as wildcard path, e.g. "kotlin.*".
The layout can be composed by the following symbols:
*- wildcard. There must be at least one entry of a single wildcard to match all other imports. Matches anything after a specified symbol/import as well.|- blank line. Supports only single blank lines between imports. No blank line is allowed in the beginning or end of the layout.^- alias import, e.g. "^android.*" will match all android alias imports, "^" will match all other alias imports.
Examples:
ij_kotlin_imports_layout=* # alphabetical with capital letters before lower case letters (e.g. Z before a), no blank lines
ij_kotlin_imports_layout=*,java.**,javax.**,kotlin.**,^ # default IntelliJ IDEA style, same as alphabetical, but with "java", "javax", "kotlin" and alias imports in the end of the imports list
ij_kotlin_imports_layout=android.**,|,^org.junit.**,kotlin.io.Closeable.*,|,*,^ # custom imports layout
Wildcard imports can be allowed for specific import paths (Comma-separated list, use "**" as wildcard for package and all subpackages). This setting overrides the no-wildcard-imports rule. This setting is best be used for allowing wildcard imports from libraries like Ktor where extension functions are used in a way that creates a lot of imports.
This setting only takes effect when rule no-wildcard-imports is enabled.
Indent size & style¶
By default, indenting is done with 4 spaces per indent level in official Kotlin code style while a single tab is used by default in the android code style.
[*.{kt,kts}]
indent_size = 4 # possible values: number (e.g. 2), "unset" (makes ktlint ignore indentation completely)
indent_style = space # or "tab"
Those settings are used by multiple rules of which rule indent is the most important.
Max line length¶
By default, the maximum line length is not set. The android code style sets the max line length to 100 (per Android Kotlin Style Guide).
[*.{kt,kts}]
max_line_length = -1 # Use "off" (or -1) to ignore max line length or a positive number to set max line length
This setting is used by multiple rules of which rule max-line-length is the most important.
Trailing comma on call site¶
By default, trailing comma's on call site are not allowed. When enabling the property, the trailing comma becomes mandatory where applicable.
Example:
This setting only takes effect when rule trailing-comma-on-call-site is enabled.
Trailing comma on declaration site¶
By default, trailing comma's on declaration site are not allowed. When enabling the property, the trailing comma becomes mandatory where applicable.
Example:
This setting only takes effect when rule trailing-comma-on-declaration-site is enabled.
Overriding Editorconfig properties for specific directories¶
You can override properties for specific directories inside your project:
[*.{kt,kts}]
ktlint_standard_import-ordering = disabled
[api/*.{kt,kts}]
ktlint_standard_indent = disabled
Note that the import-ordering rule is disabled for all packages including the api sub package. Next to this the indent rule is disabled for the api package and its sub packages.